This is a customizable order form for the Commodore Amiga CD32 and the various services offered. Please note that all costs listed are for service only, requiring you to ship not only the console but the mod/upgrade parts you have purchased yourself (with exception to the Full Recap Service as I will provide new capacitors from Console5)
Full System Recap
Electrolytic Capacitors have an estimated shelf life of about 15 years and many of these old retro gaming systems are long past that time. Prevent unwanted power, video or audio issues by proactively replacing these in your CD32 system. The CD32 mainboard has many SMD caps prone to leaking as well as 2 leaded TH caps that are sometimes installed backwards from the factory and can cause issues. All capacitors on the mainboard will be replaced with an SMD kit and new TH caps installed in correct orientation.
Optical Drive Maintenance
Over time the optical drive assembly can become dirty such as the laser lens, the gears and rail which can impact reliability. This service will fully deep clean all the gears, rail and lens housing assembly and have fresh grease applied throughout. The Laser lens will also be carefully cleaned. The CDROM connector ribbon will also be removed and have both ends cleaned.
Full Service Cleaning
After years of heavy use many consoles will exhibit accumulation of dirt, dust and debris and this can not only impact the aesthetic appearance of the system but dirty system components can impact component life and performance. Your console will be completely disassembled and cleaned from the inside out. All PCB and internal electrical components will have dust and debris removed via an electronic air compressor and then be cleaned with 99% isopropyl alcohol and brushed clean. Outer shell and other non-electronic components will be taken apart and soaked in a soap/water mixture and carefully scrubbed to remove stains and debris buildup. Any light markings, scuffs or other blemishes will be safely removed to the best of my ability. Once the console is re-assembled the outer shell will be given a coat of plastic UV protectant to restore shine and prevent UV damage
