This is a customizable order form for the NEC PC-FX systems and the various services offered. Please note that all options listed are for service only, requiring you to ship not only the console but the mod/upgrade parts you have purchased yourself (with exception of the Full Recap Service as I will provide new capacitors from Console5)
Full System Recap
Electrolytic Capacitors have an estimated shelf life of about 15 years and many of these old retro gaming systems are long past that time. Prevent unwanted power, video or audio issues by proactively replacing these in your PC-FX system. If your PC-FX is already exhibiting issues a failed capacitor could be the culprit and is usually a good first step in the diagnosis and repair. All capacitors will be replaced on the Tamura PSU and both logic and AV boards with a cap kit from Console5 which I will provide for this service, included in the cost
Optical Drive Maintenance
While the CDROM drive on the PC-FX is pretty simple, over the years it is likely that dirt and debris has stuck to the rails and gears impacting smooth operating of the laser lens. This service will have the optical drive fully disassembled and all gears/rails cleaned as well as fresh grease applied. The laser lens itself will also be carefully cleaned. Finally, will test operation on several games as the PCFX is known to struggle with FMV video playback on some titles, if this is the case the center pots will be carefully adjusted to improve playback!
Full Service Cleaning
After years of heavy use many consoles will exhibit accumulation of dirt, dust and debris and this can not only impact the aesthetic appearance of the system but dirty system components can impact component life and performance. Your console will be completely disassembled and cleaned from the inside out. All PCB and internal electrical components will have dust and debris removed via an electronic air compressor and then be cleaned with 99% isopropyl alcohol and brushed clean. Outer shell and other non-electronic components will be taken apart and soaked in a soap/water mixture and carefully scrubbed to remove stains and debris buildup. Any light markings, scuffs or other blemishes will be safely removed to the best of my ability. Once the console is re-assembled the outer shell will be given a coat of plastic UV protectant to restore shine and prevent UV damage
RetroBright Service
Like many systems of the era, the plastic shell of the PC-FX often exhibits yellowing and discoloration over time. This service uses the “Vapor” method of retrobrighting to offer a reliable and safe way to restore the original colors without marbling or damage to labels or the system logo/jewel. The shell will be fully disassembled and placed in a UV box for 24 hours (more if needed) to restore its original color. This service is best paired with the cleaning service as better results will be yielded if the shell has been thoroughly washed beforehand
