This is a customizable order form for the Casio Loopy and the various services offered. Please note that all costs listed are for service only, requiring you to ship not only the console but the mod/upgrade parts you have purchased yourself (with exception to the RGB Mod and Full Recap Service as I will provide new capacitors from Console5)
RGB Mod
The Casio Loopy’s stock composite video leaves a lot to be desired and this RGB mod is a huge jump in quality! No kits needed I can tap RGB right from the encoder, audio from the audio board and run to a DIN of your choice! If you have 8 pin RGB Scart cables (with no components inside) I have din8 connectors on hand and can route audio through them or separately via a 3.5mm jack. 9 pin connectors are also an option if you want to use HDRetroVision Genesis cables or standard Genesis SCART cables. Simply add a note during checkout about which connector you want or what cables you intend to use, also feel free to reach out to clarify anything before placing order!
Full System Recap
Electrolytic Capacitors have an estimated shelf life of about 15 years and many of these old retro gaming systems are long past that time. Prevent unwanted power, video or audio issues by proactively replacing these in your Loopy system. If yours is already exhibiting issues a failed capacitor could be the culprit and is usually a good first step in the diagnosis and repair. All capacitors will be replaced on the system motherboard and audio/video board.
Full Service Cleaning
After years of heavy use many consoles will exhibit accumulation of dirt, dust and debris and this can not only impact the aesthetic appearance of the system but dirty system components can impact component life and performance. Your console will be completely disassembled and cleaned from the inside out. All PCB and internal electrical components will have dust and debris removed via an electronic air compressor and then be cleaned with 99% isopropyl alcohol and brushed clean. Outer shell and other non-electronic components will be taken apart and soaked in a soap/water mixture and carefully scrubbed to remove stains and debris buildup. Any light markings, scuffs or other blemishes will be safely removed to the best of my ability. Once the console is re-assembled the outer shell will be given a coat of plastic UV protectant to restore shine and prevent UV damage
