FEATURES:
– The cable is compatible with RGB modded 3DO’s
– The Cable has an outer double shielding with tinned copper braid and aluminum foil that can protect up to 92% from outer interferences
– Cable is very flexible and resitant to bending and oil.
– 25AWG or 24AWG Copper wire
– A proper strain relief is inserted on the AV connector to protect the connections inside when pulling on the cable.
– All scart ground pins are interconnected
– A pcb board with all the proper components is installed inside the scart head
– A sticker with all the cable info is pressed on the scart head
– All cables are handmade and manufactured in Albania
NOTE: This cable comes in two types depending on which DIN you selected with your 3DORGB kit. It can be made with either an 8 pin or 9 pin Mini DIN connector. Since these cables are custom made they cannot be returned if you select the wrong one so please be sure you have identified your modded 3DO correctly, and if you are not sure reach out and I can assist
NOTE: All screenshots in this product listing are captured using the above EM-Modshop cable, into a RetroTink 4K and output at 1080P to an AverMedia LGP2. These shots should give you an approximate idea of the quality video signal to expect, however one must account for image and capture footage compression. The final results you will see will be improved from the provided screenshots!
