Features:
– The cable is compatible with the Sega Saturn and other RGB mods that require a 10-pin mini din connector
– The cable has an outer double shielding with tinned copper braid and aluminum foil that can protect up to 92% from outer interferences
– Cable is very flexible and resistant to bending and oil.
– 25AWG or 24AWG Copper wire
– A proper strain relief is inserted on the AV connector to protect the connections inside when pulling on the cable.
– All SCART ground pins are interconnected
– A pcb board with all the proper components is installed inside the SCART head
– A sticker with all the cable info is pressed on the SCART head
– All cables are handmade and manufactured in Albania
WARNING: Pin 9 is Csync on NTSC consoles but its 9v on PAL systems, so you should avoid using a ntsc csync cable on a
Pal system as it can damage your equipment. When choosing sync on luma, sync on composite and Csync PAL you are safe to use the cable on both systems PAL & NTSC.
NOTE: All screenshots in this product listing are captured using the above EM-Modshop cable, into a RetroTink 4K and output at 1080P to an AverMedia LGP2. These shots should give you an approximate idea of the quality video signal to expect, however one must account for image and capture footage compression. The final results you will see will be improved from the provided screenshots!
