This is a customizable order form for the WonderMega/X’Eye and the various services offered. Please note that all costs listed are for service only, requiring you to ship not only the console but the mod/upgrade parts you have purchased yourself (with exception to the FRAM and Full Recap Service as I will provide new parts/capacitors from Console5)
Region Free BIOS Install
Unlock the ability to play games from ANY region regardless of your systems hardware with a region free BIOS chip. Most sites that sell pre-flashed BIOS chips offer various splash screens based on your personal preferences, but regardless of what you choose it will be able to play games from ANY region.
You can buy region free BIOS chips here:
Will’s Console Modifications
FRAM Chip Install
The stock system relies on a supercapacitor to keep saves intact, which over time can die and cause data loss. While the SuperCap CAN be replaced during a Full Recap Service, you are still setting a shelf life in the future for keeping your data intact. You can eliminate that risk by moving to a FRAM chip which does not rely on an external power source
Full Recap Service
Electrolytic Capacitors have an estimated shelf life of about 15 years and many of these old retro gaming systems are long past that time. Prevent unwanted power, video or audio issues by proactively replacing these in your Saturn system. If your Saturn is already exhibiting issues a failed capacitor could be the culprit and is usually a good first step in the diagnosis and repair. All capacitors will be replaced on the mainboard, controller board (if applicable), CDROM and PSU with a cap kit from Console5 which I will provide for this service, included in the cost
Full Service Cleaning
After years of heavy use many consoles will exhibit accumulation of dirt, dust and debris and this can not only impact the aesthetic appearance of the system but dirty system components can impact component life and performance. Your console will be completely disassembled and cleaned from the inside out. All PCB and internal electrical components will have dust and debris removed via an electronic air compressor and then be cleaned with 99% isopropyl alcohol and brushed clean. Outer shell and other non-electronic components will be taken apart and soaked in a soap/water mixture and carefully scrubbed to remove stains and debris buildup. Any light markings, scuffs or other blemishes will be safely removed to the best of my ability. Once the console is re-assembled the outer shell will be given a coat of plastic UV protectant to restore shine and prevent UV damage
