This is a customizable order form for the NEC PCEngine CDROM Add-Ons (PCEngine CD / TurboGrafx CD / Super CDROM2) and the various services offered. Please note that all costs listed are for service only, requiring you to ship not only the console but the mod/upgrade parts you have purchased yourself (with exception to the Full Recap Service as I will provide new capacitors from Console5)
Full System Recap
Electrolytic Capacitors have an estimated shelf life of about 15 years and many of these old retro gaming systems are long past that time. Prevent unwanted power, video or audio issues by proactively replacing these in your CD Add-On. If your system is already exhibiting issues a failed capacitor could be the culprit and is usually a good first step in the diagnosis and repair. Common symptoms on these include crackling/low audio or no audio at all. All capacitors will be replaced on the system motherboard with a cap kit from Console5 which I will provide for this service, included in the cost
Optical Drive Maintenance
Over the years it is likely that dirt and debris has stuck to the rails and gears in the laser sled/assembly impacting smooth operating of the laser lens. This service will have the optical drive fully disassembled and all gears/rails cleaned as well as fresh grease applied. The laser lens itself will also be carefully cleaned. Finally, will test operation on several games both pressed OEM discs and burned/backup copies to ensure no reading issues
Full Service Cleaning
After years of heavy use many consoles will exhibit accumulation of dirt, dust and debris and this can not only impact the aesthetic appearance of the system but dirty system components can impact component life and performance. Your console will be completely disassembled and cleaned from the inside out. All PCB and internal electrical components will have dust and debris removed via an electronic air compressor and then be cleaned with 99% isopropyl alcohol and brushed clean. Outer shell and other non-electronic components will be taken apart and soaked in a soap/water mixture and carefully scrubbed to remove stains and debris buildup. Any light markings, scuffs or other blemishes will be safely removed to the best of my ability. Once the console is re-assembled the outer shell will be given a coat of plastic UV protectant to restore shine and prevent UV damage
