This is a customizable order form for the CDI and the various services offered. Please note that all costs listed are for service only, requiring you to ship not only the console but the mod/upgrade parts you have purchased yourself (with exception to the Full Recap Service as I will provide new capacitors from Console5)
RGB Mod Install
While the CDI can output a nice clean S-Video signal natively, you can get even better video quality with an RGB mod. Depending on the model of CDI (and video encoder present) you can either use a prebuilt RGB board or tap into the encoder direct and wire to a mini-din socket. For compatible BT Encoder models, the prebuilt board can be found on the following website:
Mobius Strip Technologies
Timekeeper Replacement
The Timekeeper chip is an onboard SRAM chip powered by a battery that stores save data and system configuration settings/time. Once this battery dies your system will have issues ranging from being unable to save progress to being completely non-functional (depending on the model). You can either try and source a new chip from a reputable seller and send to me for install, or your current Timekeeper can be modified to take a socketed battery which will then be replaced.
New Timekeeper chips can be purchased from the following website:
Console5
Full System Recap
Electrolytic Capacitors have an estimated shelf life of about 15 years and many of these old retro gaming systems are long past that time. Prevent unwanted power, video or audio issues by proactively replacing these in your CDI system. If your CDI is already exhibiting issues a failed capacitor could be the culprit and is usually a good first step in the diagnosis and repair. All capacitors will be replaced on the system motherboard and PSU with a cap kit from Console5 which I will provide for this service, included in the cost
Full Service Cleaning
After years of heavy use many consoles will exhibit accumulation of dirt, dust and debris and this can not only impact the aesthetic appearance of the system but dirty system components can impact component life and performance. Your console will be completely disassembled and cleaned from the inside out. All PCB and internal electrical components will have dust and debris removed via an electronic air compressor and then be cleaned with 99% isopropyl alcohol and brushed clean. Outer shell and other non-electronic components will be taken apart and soaked in a soap/water mixture and carefully scrubbed to remove stains and debris buildup. Any light markings, scuffs or other blemishes will be safely removed to the best of my ability. Once the console is re-assembled the outer shell will be given a coat of plastic UV protectant to restore shine and prevent UV damage
