This is a customizable order form for the PlayStation 2 and the various services offered. Please note that all costs listed are for service only, requiring you to ship not only the console but the mod/upgrade parts you have purchased yourself (with exception to the Full Recap Service as I will provide the new capacitors from Console5)
PixelFX RetroGEM Install
If you are looking for the best video output with or without the use of an external scaler device, look no further than the RetroGEM HDMI Mod. Pulling direct digital video signal from the PS2 you get the sharpest and cleanest video signal possible. The RetroGem also comes with a host of options for deinterlacing, scanlines, and a range of selectable output resolutions all the way up to full 1440P (If you select the Shiny Edition)
RetroGem mod kits can be purchased from the following website:
PixelFX Co
PLEASE NOTE: Not all motherboard versions of the Fat and Slim PS2 Models are supported and in some cases even supported motherboards require aftermarket power supply or different shielding to fit properly. Please check the above link to confirm your motherboard is on the compatible list before placing order or sending anything to me. If you need help identifying just reach out and I will try and assist!
Noctua Fan Install
Some revision PS2 fat models have extremely loud fans that are quite distracting even if clean. This solution from ThePeacefulOutcome is a drop in replacement for the stock fan and cleanly mounts the new Noctua to the rear of the console in a black cage with matching aesthetic. This will significantly reduce the noise especially if you are using a network adapter to run games off an HDD which normally causes the fan to run at higher speeds.
The noctua kit can be purchased from the following website:
ThePeacefulOutcome – PS2 Noctua Kit
PLEASE NOTE: Be sure to read the model compatibility information on the above site and reach out if you have any questions before buying anything or sending in your PS2 for this install!
RePS2 PSU Install
If you want the original PSU removed to run a more efficient modern PSU that will cause less heat buildup internally and use easy to find power bricks (with suitable barrel connector) this kit offers that and is also a viable replacement if your OEM PSU is not functioning
RePS2 kit can be purchased from here:
StoneAgeGamer – RePS2
PLEASE NOTE: Be sure to read the info at StoneAgeGamer about purchasing and using the correct / quality external power bricks!
Full Recap Service
Electrolytic Capacitors have an estimated shelf life of about 15 years and many of these old retro gaming systems are long past that time. Prevent unwanted power, video or audio issues by proactively replacing these in your PlayStation 2 system. If your PS2 is already exhibiting issues a failed capacitor could be the culprit and is usually a good first step in the diagnosis and repair. All capacitors will be replaced on the system motherboard and the PSU board with a cap kit from Console5 which I will provide for this service, included in the cost
Full Service Cleaning
After years of heavy use many consoles will exhibit accumulation of dirt, dust and debris and this can not only impact the aesthetic appearance of the system but dirty system components can impact component life and performance. Your console will be completely disassembled and cleaned from the inside out. All PCB and internal electrical components will have dust and debris removed via an electronic air compressor and then be cleaned with 99% isopropyl alcohol and brushed clean. Outer shell and other non-electronic components will be taken apart and soaked in a soap/water mixture and carefully scrubbed to remove stains and debris buildup. Any light markings, scuffs or other blemishes will be safely removed to the best of my ability. Once the console is re-assembled the outer shell will be given a coat of plastic UV protectant to restore shine and prevent UV damage. This cleaning service also includes the application of brand new thermal pads.
