This is a customizable order form for the SNES and the various services offered. Please note that all costs listed are for service only, requiring you to ship not only the console but the mod/upgrade parts you have purchased yourself (with exception to the Full Recap Service as I will provide new capacitors from Console5)
Edge Enhancer Install
This kit will dramatically clean up the video output that in 2-chip systems resulted in blurred edges and dull output compared to the highly sought after 1-chip models, essentially putting both on a level field when it comes to video quality. This also removes the vertical bar effect and video noise from the RGB output. To me the value in sending this kit and your console for a professional installation is to yield the absolutely best results one can get, therefore I will not be offering the basic install for this mod, only the advanced which is why there is only one price for the service, even if there are multiple ways to tackle it.
This kit is ONLY compatible with 2-chip systems and cannot be installed in a 1-Chip SNES or SNES Jr/SFC Jr, so it’s imperative you verify your console revision before ordering the kit and sending your system in to me for work. Voultar designed this kit and has provided documentation on revision identification, please visit this site and confirm your model:
SNES Model Identifaction – Voultar.com
The Edge Enhancer Kits themselves are also purchased from Voultar at the following location:
EdgeEnhancer Kit – Voultar.com
NOTE: If you send me the kit and an incompatible SNES system for install the kit and SNES will be returned to you and while I will refund the Edge Enhancer install cost, there will be no refund on return shipping
SNESRGB Install
This kit will restore the missing RGB (and add Svideo) to the SNES/SFC Jr as well as improve the native RGB output of 1-Chip systems. This also comes with the ghosting fix cap replacement. This kit is ONLY compatible with the aforementioned systems and cannot be installed in a 2-Chip SNES, so it’s imperative you verify your console revision before ordering the kit and sending your system in to me for work. Voultar designed this kit and has provided documentation on revision identification, please visit this site and confirm your model:
SNES Model Identication – Voultar.com
The SNESRGB Kits themselves are also purchased from Voultar at the following location:
SNESRGB Kit – Voultar.com
NOTE: If you send me the kit and an incompatible SNES system for install the kit and SNES will be returned to you and while I will refund the RGB install cost, there will be no refund on return shipping
Full Recap Service
Electrolytic Capacitors have an estimated shelf life of about 15 years and many of these old retro gaming systems are long past that time. Prevent unwanted power, video or audio issues by proactively replacing these in your SNES/SFC system. If your system is already exhibiting issues a failed capacitor could be the culprit and is usually a good first step in the diagnosis and repair. All SMD and radial capacitors will be replaced on the mainboard with a capacitor kit from Console5, included in the cost
Full Service Cleaning
After years of heavy use many systems will exhibit accumulation of dirt, dust and debris and this can not only impact the aesthetic appearance of the system but dirty system components can impact component life and performance. Your console will be completely disassembled and cleaned from the inside out. All PCB and internal electrical components will have dust and debris removed via an electronic air compressor and then be cleaned with 99% isopropyl alcohol and brushed clean. Outer shell and other non-electronic components will be taken apart and soaked in a soap/water mixture and carefully scrubbed to remove stains and debris buildup. Any light markings, scuffs or other blemishes will be safely removed to the best of my ability. Once the console is re-assembled the outer shell will be given a coat of plastic UV protectant to restore shine and prevent UV damage
