This is a customizable order form for the 32X and the various services offered. Please note that all costs listed are for service only, requiring you to ship not only the console but the mod/upgrade parts you have purchased yourself (with exception to the Inductor Coil and Full Recap Service as I will provide the coil/capacitors from Console5)
Full System Recap (w/Video Noise Fix)
Electrolytic Capacitors have an estimated shelf life of about 15 years and many of these old retro gaming systems are long past that time. Prevent unwanted power, video or audio issues by proactively replacing these in your 32X. If your system is already exhibiting issues a failed capacitor could be the culprit and is usually a good first step in the diagnosis and repair. All capacitors will be replaced on the system motherboard with a cap kit from Console5 which I will provide for this service, included in the cost.
Additionally, the 32X is notorious for having video noise issues in its image output and this can be resolved by replacing and upgrading 2 capacitors on the 32X. Both of these new capacitors come as part of the Console5 cap kit and will be done with this recap service
Inductor Coil Replacement
Some 32X units can produce a very loud audible “whine” when receiving power and the fault is usually the L7 Inductor Coil. This service will replace the faulty one with a quality replacement from Console5.com
Auto HZ / Switchless Region Mod
If you want to use a 32X on your region modded MegaDrive or play one of the few original carts exclusive to PAL territory you will need this region kit installed in order to do so. Solders directly to 32X mainboard and will detect and match the region/speed of the MegaDrive or Genesis the system is plugged into.
Kits can be ordered here:
32X Switchless Region Kits – ConsolesUnleashed
Full Service Cleaning
After years of heavy use many consoles will exhibit accumulation of dirt, dust and debris and this can not only impact the aesthetic appearance of the system but dirty system components can impact component life and performance. Your console will be completely disassembled and cleaned from the inside out. All PCB and internal electrical components will have dust and debris removed via an electronic air compressor and then be cleaned with 99% isopropyl alcohol and brushed clean. Outer shell and other non-electronic components will be taken apart and soaked in a soap/water mixture and carefully scrubbed to remove stains and debris buildup. Any light markings, scuffs or other blemishes will be safely removed to the best of my ability. Once the console is re-assembled the outer shell will be given a coat of plastic UV protectant to restore shine and prevent UV damage.
With the 32X in particular, the ribbon cables will be carefully removed, cleaned and inspected for damage as well as having all 4 ribbon slots cleaned out
